Gatorubet
Loathing All Things Georgia
Tonyank;1922518; said:
Saw31;1922520; said:Gotta be smarter than the piece of plastic...
:p
Now for the real advice. Just changed a drain with a similar (but metal) nut. Hammer and chisel was the remedy. Chisel through it until it splits then you can peal it off. Then replace it.
I'm assuming you mean one of these or similar...
Great suggestions. Turned out, I just needed more beer. Which made me madder. Which caused me to swing a five pound pipe wrench on the old faucet with great fury, not caring if I damages the sink.
This, it seems, will loosen and/or break the plastic lock washers. Although an extended backswing did take out one wine glass.
Installed and working.
Upvote
0